Trouble-Free Plans Of 6G Welding – Further Examination

There are many kinds of welding techniques used today and one of the more complicated and challenging ones is 6G pipe welding. This welding technique typically involves joining cylindrical metal tubes using a shielded metal arc welding technique or even a gas shielded arc welder. There are many challenging methods to learn to be a professional welder and 6G welding is considered the most complex and hard to discover (take note: you can easily read more by visiting this page).

To become professional and proficient welder, one should have the ability to tackle different tasks and be ready to become informed about a variety of materials in different thicknesses. There are many challenges relevant to 6G pipe welding with the main ones concerning the positions you have to be in to get the task done and the skills you should master the welding techniques needed that you can attain the greatest results. Fortunately, those that excel at 6G welding generally earn more than welders who happen to be proficient at simpler welding techniques. And that’s as the 6G welding approach is very difficult to learn.

What’s 6G Welding?

The “G” in 6G signifies the weld type, which is actually a groove weld even though the “6” means the positioning of the welded pipes. Groove welds are joints that join two metal tubes in which the space involving the two is loaded with welding material.

A frequent welding process that’s used when welding pipes is open root welding. Using this technique, the welding joint doesn’t employ a tacked backing plate. This technique can be quite a bit difficult to master because the weld has been made across a gap. To prevent making mistakes and messing up the job, welders must employ the proper welding techniques.

One important thing that complicates pipe welding is the fact that getting around the pipe to access the gap will most likely mean that you block your view with one of both hands eventually. In addition to that, it’s a welding technique that will require that you use both hands to complete the task. Therefore, it’s important to take time to discover which of your respective sides is definitely the good side and which is the bad one when it comes to pipe welding – and that’s correlated to whether you’re left-handed or right-handed.

Focusing on the left-hand side of the tube is going to be challenging for right-handed people, and vice-versa. Identifying this obstacle early will assist you to learn methods to overcome it to actually don’t ruin your welds.

Dealing with Pipe Welding Positions

Becoming skilled at using the right positions will make certain you always receive the best results when pipe welding. The system of letters and numbers you can see on pipes is a kind of code that indicates the type of joint and position you are required to use.

There are four welding positions and these are 1G, 2G, 5G, and 6G.

The 1G position can be a flat welding position that’s not used very often. Though it’s still imperative that you learn it a welder. 1G welding is essentially flat-welding because the tube is lying about the curved edge (on its side) and will be rotated during welding.

The 2G position, however, is fixed – the pipe being welded can’t be turned. However, because it is added to its base, welding the pipe becomes simpler since it is stabler and sturdier.

Just like the 1G position, 5G position means the pipe is horizontal but can’t be moved as it’s fixed into position. In such a case, you’ll must weld the pope in various positions, including overhead. Other positions combined with this position include vertical down and vertical up.

By far the most challenging welding position is definitely the 6G welding position. That’s as the pipe being welded is in a 45-degree angle. 6G welding will require that you pay very close focus to both your bad and good side since welding without blocking your view with one of both hands is virtually impossible.

Anytime you start to see the letter “R” in welding codes, because of this the welding position can be a restricted one – and that’s either visually or physically.

The 6G Welding Position

Something that complicate 6G welding is the fact that because the welds are vertical, molten filling metal is likely to flow downward into the joint cavity during welding. To avert this, you should practice a whole lot. Also, considering that both pipes are horizontal to each other with one tube positioned with a 45O angle on the other, discovering the right position as being a welder can be difficult. Using this welding technique, you will discover yourself the need to use different body positions and various skills to perform your goal.

6G Welds: Just what are They User For?

Groove welds are employed on all kinds of joints except lap joints (i.e., joints made of overlapping tubes.) While it’s rare for certified welders to encounter pipes which require a 6G weld during their career, the welding position is normally used as being a pre-employment test.

The 6G Welding Test

Also called the Arkansas Bellhole Tests, the 6G welding test is used to weigh the relevant skills of your welder. The test is quite stringent because the welder has to use various welding techniques (horizontal, vertical, and flat welding) to attain a 6G weld. These welds are often produced by welders in trades including steel working, which require skilled welding abilities. When a welder can make good 6G welds, these are tested on it and have certified once they pass the exam.

6G Welding Certification

Those seeking to become certified pipe welders must go through a, somewhat, demanding process as they should prove that they are not only good with welding machines but that they also can produce quality penetration and can be employed in restricted spaces with restricted views. In addition to that, a prospective welder will have to pass a test regarding their all-position welding technique.

You can learn more pertaining to the 6G welding certification on this site:

To get a 6G certification, you have got to attend a good welding school, that may be costly and time-consuming. However, in the end, you’ll have gained extra skills that increase your career as being a welder.

6G pipe welding is among the toughest weld certifications tests a welder can pass because the pipe is immovable as well as at a 45-degree angle. To be 6G certified, you have to prove that you can weld pipes in all positions – overhead, horizontal, and vertical – and that you are proficient at welding with both hands.

Certification Sources

In The US, 6G certification is available through the American Welding Society jointly with a myriad of other organizations that offer certification tests. The American Welding Society lists over 80 accredited weld testing institutions where applicants can take 6G certification tests. The Society’s certification application contains a weld testing section that has got to be completed by one of its Accredited Testing Facilities.

Some 6G pipe welder certification providers in America also offer training to help you welders pass their certification test. As an example, AVTEC offers certification once a welder has completed its 75 events of training and 450 hours welding degree program. Industrial Training Solutions, however, sponsors a 6G welder certification that involves 120-hours of hands-on welding instructions in preparation for your welding certification exam.

Costs and Requirements

Each welder’s certification program requires its applicants to satisfy specific requirements. As an example, some facilities, like Industrial Training Solutions, requires their applicants to have some several years of welding experience (two years in this case) before they may enter into the program. Others requires that you just hold, at a minimum, a 3G welding certification.

It’s worth noting that the cost of acquiring 6G pipe welding certification varies dependent upon the institution providing the certification. The AWS charges about $35 for every certification, while the cost of tests are catered for by applicants. Most programs cost around $4,000 to $5,000 – and this includes testing and training.

Simply How Much Do 6G Welders Make?

The normal hourly rate for 6G welders in the US is $24.91/hour though it might be able to up to $40/hour or as low as $17/hour, depending on how experienced and skilled a welder is and the state they reside. A skilled 6G welder can earn around $98k/year (this can include commissions, bonuses, and profit-sharing) should they be good at their business and help a big company.


Mastering the skill of pipe welding can take your career to great heights. However, it means learning among the most complicated and challenging welding skills and methods from the welding industry. However, if you put in the time and effort and pass the certifications, you will get gained a highly-prized skillset that may be sought after by a number of the top employers from the metalworks industry. While 6G welding doesn’t require any special or extra equipment, it’s a welding process that will not be for your half-hearted. If you are interested in learning to be a professional and reputable 6G welder, find a good welding school, put in the effort, and acquire a 6G welding certification. While it will most likely be the most significant challenge you may have ever faced, figuring out how to professionally 6G pipe weld will increase your chances of learning to be a much sought-after professional welder.

Leave a Reply

Your email address will not be published. Required fields are marked *